Global teams provide diversity while eliminating conflicts and miscommunication.

You are watching: In the area of product and service design, the acronym cad refers to:

FALSE Using around the world varied design teams boosts the risks of conflicts and also misinteraction.

A ‘House of Quality’ is achieved when no department in a solitary place has actually even more than 15% rejects.

FALSE The residence of high quality is a method of integrating the voice of the customer right into the product or service advance procedure.

Conpresent Engineering is another term for sequential breakthrough.

FALSE Conpresent engineering requires simultaneous product and manufacturing development.

One of the main advantages of standardization is that it increases the potential variety of products

FALSE Standardization reduces the array of commodities.

A disbenefit of standardization is the possibility of standardizing deindications too at an early stage, which may make it challenging to modify in the future.

TRUE Standardization locks firms right into deindications that aren’t easily readjusted.

Reducing consumer choices provides business even more effective.

TRUE Efficiency comes from the standardization that outcomes from decreased consumer options.

Modular style rises costs of purchasing and managing inventory compared to non-modular.

FALSE Modular deindications make inventory management much easier and also cheaper.

Product failures deserve to be easier to remedy through modular architecture.

TRUE Modular designs make it easy to change just sections of the style.

One inspiration for an organization to rearchitecture its product or service is to protect against the alternative of downsizing the organization.

TRUE The hazard of downsizing often spurs product or business rearchitecture.

A significant advantage of Computer Aided Deauthorize (CAD) is the enhanced productivity of developers.

TRUE CAD often tends to considerably boost designers’ productivity.

Most of the time what is dubbed product or organization architecture is actually a redesign of an existing product or organization.

TRUE Usually the core product or service continues to be relatively unadjusted also though other functions are modified or amplified.

A service blueprint is rather equivalent to an architectural drawing.

TRUE A service blueprint shows the basic customer and also organization actions affiliated in a organization procedure.

The process of dismantling and also inspecting a competitor’s product to discover product development is dubbed benchmarking.

FALSE Dismantling and inspecting a competitor’s product to find product improvement is referred to as reverse engineering.

To conserve money, it is essential that designers revise the production capabilities to fulfill the needs of the brand-new products.

FALSE Saving money requires designers to encertain that new products can be produced making use of existing manufacturing capabilities.

Many US manufacturers are currently shifting their emphasis from products to both product and also procedure improvements.

TRUE Both product and procedure must be considered in the product/service style question.

Applied research has the objective of achieving commercial applications for brand-new concepts.

TRUE Applied study is aimed at commercializing basic research.

Basic research study is done via the expectation that explorations will have near-term commercial application

FALSE Basic research study is done through no clear expectations regarding commercial application.

"Design for production" takes right into account the capabilities of the company to produce or deliver a given product or service.

TRUE Deauthorize for manufacturing is vital to encertain that product or service architecture decisions are feasible.

Consumers tfinish to stand up to purchasing commodities containing recycled products.

FALSE Consumers are beginning to respond positively when indeveloped that their purchases contain recycled products.

"Conpresent engineering" brings world pertained to with production right into the architecture phase previously than in the "over-the-wall" technique.

TRUE Conpresent engineering civilization concerned via production are proactively involved in the style phase.

"Concurrent engineering" suggests that at least two engineers are associated in product architecture at the exact same time.

FALSE Conpresent engineering means that engineers, marketing, manufacturing and purchasing personnel regularly are jointly associated in the product design.

One method to extfinishing a product’s life cycle is to promote different offers of the product.

TRUE Alternate offers extfinish product life cycles.

"Quality Function Deployment" is a structured strategy that guarantees that the highest top quality product or business will be designed.

FALSE Quality Function Deployment ensures that the voice of the customer is incorporated right into the product or organization architecture question.

Product licapability implies that a manufacturer is liable for any kind of injuries and also dameras caused by a faulty product because of bad workmanship or design.

TRUE Product licapability is a major worry for manufacturers.

The procedure of dismantling and also inspecting a competitor’s product to uncover advancement is called reverse design.

TRUE Reverse design is a legitimate implies of evaluating the competitive landscape.

Research and advancement (R&D) describes organized initiatives that are directed toward enhancing clinical understanding and also product (or process) development.

TRUE Product or process creations often result from delibeprice R&D programs.

Standardization refers to the level to which there is lack of variety in a product, service, or process.

TRUE Standardization reduces selection and leads to greater efficiency.

Re-production refers to rerelocating some of the components of old commodities and reusing them in new products.

TRUE Re-manufacturing is a way of raising sustainability.

The demand also for a product and the price of technical readjust have substantial impact on the size of a provided phase of the product life cycle.

TRUE How long a product remains in a specific phase of its life cycle relies considerably on the price of technological readjust.

Robust design defines a product that will certainly perdevelop satisfactorily so lengthy as it is offered in an extremely narrowhead selection of conditions.

FALSE Robust deindicators percreate satisfactorily throughout a vast selection of problems.

Taguchi style approaches involve identifying the optimal operating or eco-friendly problems for a given product.

FALSE Taguchi architecture approaches involve developing commodities that are fairly insensitive to ecological determinants.

Quality attribute deployment (QFD) is based on a collection of requirements which relate customer demands to agency capabilities.

FALSE QFD relates customer demands to product deindicators and also the capabilities important to carry these designs out.

The top quality attribute deployment (QFD) matrices are often described as the "House of Quality" bereason, as soon as completed, they "house" every one of the customer’s quality requirements.

FALSE QFD matrices link customer needs through other product/process architecture elements.

Service design frequently must take into account the degree of customer call compelled.

TRUE Customer call is a crucial organization architecture worry.

Reliability refers to the capability of a product to percreate its intended attribute under normal problems.

TRUE Greater relicapability converts into a greater likelihood of the product functioning in normal problems.

Applied study is the significant R & D initiative of company organizations bereason of the desire for commercial applications.

TRUE Most business organizations focus on applied fairly than fundamental research.

Commonality of components is advantageous for production yet not for services.

FALSE Services deserve to benefit from commonality in service aspects.

Standardization deserve to at times cause significant difficulties and also competitive battles, specifically as soon as devices are running under different problems.

FALSE It is the lack of standardization that can at times result in severe challenges and competitive struggles.

The term faitempt as applied to relicapability means that a component or item does not function at all.

FALSE Faitempt implies that the part or item does not feature as it must.

Reliability have the right to be defined in terms of a specific point in time or in terms of length of organization.

TRUE Reliable deindicators can be counted on to occupational over time.

Relicapability can be improved by the use of backup components.

TRUE Adding a backup component is often cheaper than increasing the relicapability of a provided component.

Delayed differentiation and modular design are methods for mass customization.

TRUE These enable selection without providing up also a lot in the method of standardization.

Life-cycle assessment entails incorporating wright here the product or service is in its life-cycle into system-style decision-making.

FALSE Life-cycle assessment involves assessing the ecological affect of a product or service as it goes through its advantageous life.

The goal of life-cycle assessment is to incorpoprice the eco-friendly affect of products or services into product-design or service-design decision-making.

TRUE Life-cycle assessment involves assessing the ecological impact of a product or organization as it goes through its advantageous life.

The three R’s – Reduce, Re-use and Recycle – are more applicable in service style than in product style.

FALSE Services cannot be re-provided or recycled.

The goal of value evaluation is to uncover methods of _______. A. I. Reducing the expense of parts and products B. II. Improving the performance of the product or company C. III. Incorporating multiple cultural values in international device style D. Both I and also III E. Both I and II

E. Both I and also II In worth evaluation an effort is made to minimize the price and/or boost the performance of the product.

When considering re-use worries for a provided product, an important variable to take right into account is that product’s _______.

E. None of the above Remanufacturing refers to refurbishing offered assets.

Incorporating design for disassembly (DFD) values in product design helps firms through ___________ style issues.

C. Re-use Refurbished assets have to initially be disassembled.

Designing for recycling helps facilitate ______.

B. Compliance with regulatory atmospheres Regulatory atmospheres are increasingly focused on encouraging recycling.

One method to rise relicapacity is to:

A. enhance component style Another way is to include backup components.

One way to rise relicapacity is to:

B. boost preventative maintenance measures Preventative maintenance leads to much longer intervals between breakdowns.

Which of the following is not a reason for remaking a product or service?

B. to increase the level of employee satisfactivity A product or service rearchitecture does not necessarily involve enhancing employee satisfaction.

A disadvantage of international teams for product design is that:

D. Ease of challenge to face meetings is lacking given that members are located everywhere If confront to confront interactivity is compelled, global design teams could not be a viable choice.

Mobile phones have progressed from tools intfinished to area and also receive phone calls right into handhosted multimedia interactions devices, yet in the eyes of some customers these brand-new functions make the phones much less preferable. This is an example of _________.

B. creeping featurism Customer satisfaction isn’t strictly dependent on the number of functions a product offers.

One step that isn’t part of company blueprinting is:

A. Eliminate limits for the service and also decide on the level of interaction required Defining limits is a crucial component of organization blueprinting.

The study and also development task which starts after positive research outcomes are available and attempts to rotate these results into beneficial commercial applications is:

C. advance Growth is the conversion of used study right into beneficial commercial applications.

The benefits of standardization include which of the following? (I.) The opportunity to freeze architecture at a very early stage (II.) Fewer components to attend to in inventory (III.) Reduced training cost and also time (IV.) Purchasing is even more routine

D. II, III, IV Standardization doesn’t necessarily assist in freezing deindications beforehand.

Products or services via a high level of similarity of functions and also components are called:

D. product family’s Delineating product families helps result in component commonality.

"Must have", "expected" and "excitement" features are categories in the ____ design.

B. Kano The Kano version is an alternate to "even more is better" architecture approaches

One possible disbenefit of modular style is that:

C. variety of configurations of modules decreases Modular deindicators do have the impact of reducing variety.

In the area of product and service architecture, the acronym CAD refers to:

B. computer system aided architecture CADVERTISEMENT ca rise the efficiency of product developers.

Which of the adhering to statements around CAD is not true?

E. It is used effectively by all production carriers. Not all manufacturers use CADVERTISEMENT.

Which one of the complying with is not a variable of successful product and business design?

D. use computerized design methods Computerized architecture techniques don’t necessarily cause effective product and company style.

A software application agency is weighing whether to release a brand-new version of its software. The agency deserve to go ahead and release the variation now and also correct fregulations with subsequent patches or upqualities, or it have the right to wait till the brand-new variation is reasonably bug-complimentary. This is an example of _____.

C. vaporware Vaporware is attrenergetic from some perspectives yet not from others

Ideas for new or enhanced designs can come from:

E. every one of the above Companies look to many type of resources for concepts for brand-new or improved deindications.

The procedure of dismantling and inspecting a competitor’s brand-new or revised product for the objective of gleaning style concepts is called:

C. reverse design Reverse engineering can be a good resource of principles for product architecture.

The term ‘degrees of newness’ is associated with:

D. level of style readjust Superficial style alters are low in ‘degrees of newness.

The term ‘standardization’ is very closely connected with:

E. interchangecapacity Modular deindicators depend on standardized components that are interchangeable.

Service style mainly differs from product style in which of the following ways?

B. There is much less latitude in detecting and also correcting errors prior to distribution. Often company style flegislations are not found until some customers have actually been served.

The structural method for integrating customer demands right into eexceptionally aspect of product advance is recognized as:

C. high quality feature deployment Quality Function Deployment brings the voice of the customer right into the product advancement procedure.

Which of the following is an worry that designers should take into account in product and company design?

E. all of the over Deindicators have to reflect a huge variety of components.

One of these is not a characteristic of a well-designed service system:

C. Distributed computer system networks Well-designed company devices tfinish to be user friendly, robust, cost-reliable and easy to sustain.

A formal method to record customer needs is:

B. top quality feature deployment (QFD) QFD brings the voice of the customer right into the design process.

Which of the following is not true around re-manufacturing?

D. It produces high high quality assets easily. Re-manufacturing have the right to be an extremely hard and costly procedure.

Which of the complying with is not among the phases of product design and also development?

E. performance applied research Product architecture and advance begins after applied research has actually been done.

Elements of the organization process in which there is little to no call with the customer are described as ____________.

C. back-of-the-home Those elements including substantial call through the customer are referred to as "front-of-the-house" operations.

In solutions, flowcharts are beneficial for ____________.

See more: The Masters Tv Schedule 2017 Masters, Pga Tour Tv Times, Schedule: 2017 Masters

B. identifying and determining the sequence of customer and business actions and also interactions The customer-organization interactivity is depicted utilizing flowcharts.